See Chart Operation and Market Analyzer Operation for instructions on how to access the parameters dialog to adjust the settings listed below.
Show License Button? |
Check this box if you want to force the hpcLicensing button to be displayed in the chart. Default value is unchecked (false).
|
Bars To Process |
Input the number of bars that should be processed for pattern activity. The default is 600. Range is from 100 to 2000.
The pattern-scanning process is fairly cpu-intensive so we use the Bars To Process setting to limit the number of bars over which active scanning will take place. So, for example, if you loaded a chart with 10,000 bars it might take several seconds for the scan to complete if there was no limit. However, with the Bars to Process setting in place we will skip those older historical bars entirely and focus only on the most recent X bars, where X is the value you have specified for Bars to Process.
|
Show Bullish Patterns? |
Check this box to display all Bullish patterns found in the price data. Default value is checked (true).
|
Show Bearish Patterns? |
Check this box to display all Bearish patterns found in the price data. Default value is checked (true).
|
Show AB=CD? |
Check this box to display all AB=CD patterns found in the price data. Default value is checked (true).
|
Show Bat? |
Check this box to display all standard Bat patterns found in the price data. Default value is checked (true).
|
Show Alt-Bat? |
Check this box to display all Alt-Bat patterns found in the price data. Default value is checked (true).
|
Show Butterfly |
Check this box to display all Butterfly patterns found in the price data. Default value is checked (true).
|
Show Gartley? |
Check this box to display all Gartley patterns found in the price data. This selection will control the Gartley and Gartley886 patterns. Default value is checked (true).
|
Show Crab? |
Check this box to display all standard Crab patterns found in the price data. Default value is checked (true).
|
Show DeepCrab? |
Check this box to display all Deep Crab patterns found in the price data. Default value is checked (true).
|
Show Shark? |
Check this box to display all Shark patterns found in the price data. Default value is checked (true).
|
Show 5-0? |
Check this box to display all 5-0 patterns found in the price data. Default value is checked (true).
|
Strict ABCD? |
Check this box to force a more stringent evaluation for ABCD patterns. This will generally result in fewer overall ABCD patterns being found, but those displayed will be of higher quality and, therefore, more reliable. Default value is checked (true).
|
ABCD Align ATRs |
When Strict ABCD? above is checked, you can specify an allowable ATR range for the pattern.
This basically looks at a straight line drawn from the A point, through the middle of the B/C points and it compares the end-point of this line with the actual D point of the pattern. If the distance between the two is within the specified ATR range then the pattern is allowed, if not then the pattern is rejected. This prevents the display of somewhat lopsided ABCD patterns that otherwise meet the minimum ratio requirements.
Default value is 1.5 ATRs.
|
Specify the maximum number of points that patterns are allowed to share. The default is 2. By "point" we mean swing points (i.e., where the O, X, A, B, C, D, etc. labels are drawn). If a new pattern is found and if this pattern shares more than the allowable maximum points with another existing pattern then the larger of the two patterns will be kept and the other discarded. Note that this filter applies to Confirmed (completed) patterns only and does not apply to Pending or Potential patterns. Valid range is from 0 to 4. See Display Filters.
|
|
Min Pattern Length |
Specify the minimum allowable pattern length. This measure uses the distance, in bars, from the very first point in a pattern to the very last point. Patterns that are shorter than the specified length will not be displayed. The range is between 20 bars and 3000 bars. Default value is 30 bars.
|
Max Pattern Length |
Specify the maximum allowable pattern length. This measure uses the distance, in bars, from the very first point in a pattern to the very last point. Patterns that are longer than the specified length will not be displayed. The range is between 20 bars and 3000 bars. Default value is 300 bars.
|
Check this box if you wish to hide any patterns that are formed within a larger pattern. If true then any Confirmed patterns that are found to be within the boundaries of a larger Confirmed pattern will be discarded. If false then patterns are drawn regardless of whether or not they happen to be inside of larger patterns. Note that this filter applies to Confirmed (completed) patterns only and does not apply to Pending or Potential patterns. Default value is checked (true). See Display Filters.
|
|
If checked, then the pattern engine will draw an imaginary line between the specified points and check all price bars between those two points against this line. If the close of any bars push through this line then the pattern is discarded. If not checked then this test is not performed. See Pattern Filters. Default value is not checked (false).
|
|
None Past B/D? |
If checked, then the pattern engine will draw an imaginary line between the specified points and check all price bars between those two points against this line. If the close of any bars push through this line then the pattern is discarded. If not checked then this test is not performed. See Pattern Filters. Default value is not checked (false).
|
Show Pending Patterns? |
Check this box to display any Pending patterns found in the price data. A Pending pattern is any pattern that meets all of the pattern requirements as of the current (realtime) bar. Now, this pattern will not become a Confirmed pattern until the pivot that forms the final leg has completed (which can be as of the close of the very next bar, or several bars in the future if this happens to be a multi-bar pivot).
Note that a Pending pattern is not guaranteed to become a Confirmed pattern since the current, developing, bar may still move to extremes that invalidate the pattern. However, this feature gives you an important heads-up and gives you time for planning/preparation before the pattern becomes Confirmed. Default value is checked (true). See Overview.
|
Show Potential Patterns? |
Check this box to display any Potential patterns found in the price data. A Potential pattern is any pattern that has completed all but the very last leg, and has met all of the rules and requirements for the legs that have completed.
Depending upon the harmonic pattern, there may be several Potential patterns being tracked by the pattern engine at any given time. If this feature is turned on, the pattern engine will display the Potential pattern that is closest in terms of price and time.
When displaying Potential patterns, the pattern engine will draw the completed legs and project the area in the future where price and time would have to meet in order to complete the pattern. Default value is checked (true). See Overview.
|
Potential Logic: |
Select from "C is Formed", "B/C Midpoint Exceeded", and "B Exceeded". These are represented as the numbers 1, 2, and 3 in the menu.
This option allows you to instruct the pattern engine as to when a Potential pattern is a candidate for display (i.e., immediately after the C leg is completed, or only once price moves past the midpoint of the B/C leg, or only once price exceeds the B leg).
Note that regardless of this setting, a Potential pattern will only be displayed if and when all of the other filters/rules have been satisfied. Default value is "B Exceeded" which is number 3.
|
Set the line length to use when drawing the PRZ (Potential Reversal Zone) zone lines. Default value is 10 bars. To disable the display of the zone lines, set this value to 0. See Zone Lines.
|
|
Set the additional line length used to draw the T1 and T2 target lines for each pattern. Default value is 10 bars. This means that if the Zone Line Extension is 10 bars then the total line length for the T1 and T2 targets will be 20 bars.
|
|
Select from "Once per Bar" and "Every X Seconds". These are represented as the numbers 1 and 2 in the menu.
This controls how frequently the indicator will check for new and/or updated Potential and Pending patterns while intrabar. Default value is 2 ("Every X Seconds").
|
|
Update Interval (seconds) |
If "Every X Seconds" is selected above then the updates will occur at the interval defined here. Valid range is between 1 and 600. Default value is 20 meaning that the indicator will update every 20 seconds when in realtime, regardless of the actual bar interval.
|
Most Recent
|
Specify the maximum number of confirmed patterns that should be displayed in a chart. With this option you can filter your chart display to either display all patterns, or only the most recent patterns. So, for example, if you only wanted to see the two most recent Confirmed patterns in all of your charts then you would set this value to 2.
Default value is 0 meaning display all patterns.
|
Do Pattern Fill? |
Check this box to draw all patterns with a filled body. When checked, all bullish confirmed patterns will be filled with a pale green color, all bearish confirmed patterns will be filled with a pale red color, all pending patterns will be filled with a pale blue color, and all potential patterns will be filled with a light grey color. All fill colors are based on the Pattern Leg colors that you define below.
Default value is checked (true).
|
Fill Opacity (0.0-1.0) |
Input the opacity value to use for filling the pattern bodies if Fill Patterns? is checked. Valid range is a value between 0 and 1. Default is 0.10.
|
|
Size (4-55) |
Select the font size to use to draw the terminal bar identification symbol. Input a value between 4 and 55. Default is 20.
|
Confirmed Bullish Leg Color |
Select the color to be used to draw the legs for bullish Confirmed patterns. Default is green.
|
Confirmed Bearish Leg Color |
Select the color to be used to draw the legs for bearish Confirmed patterns. Default is maroon.
|
Pending Leg Color |
Select the color to be used to draw the legs for Pending patterns. Default is royal blue.
|
Potential Leg Color |
Select the color to be used to draw the legs for Potential patterns. Default is grey.
|
Thickness (1-10) |
Select the line thickness to use to draw all pattern legs. Default is 2.
|
Confirmed Ratio Line Color |
Select the color to be used to draw the ratio lines for Confirmed patterns. Default is grey.
|
Pending Ratio Line Color |
Select the color to be used to draw the ratio lines for Pending patterns. Default is royal blue.
|
Potential Ratio Line Color |
Select the color to be used to draw the ratio lines for Potential patterns. Default is light grey.
|
Thickness (1-10) |
Select the line thickness to use to draw all ratio lines. Default is 1.
|
Confirmed Leg Label Color |
Select the color to be used to draw leg labels for Confirmed patterns. Default is royal blue.
|
Pending Leg Label Color |
Select the color to be used to draw leg labels for Pending patterns. Default is navy.
|
Potential Leg Label Color |
Select the color to be used to draw leg labels for Potential patterns. Default is dark grey..
|
Font Size (4-55) |
Select the font size to use to draw all leg labels. Input a value between 4 and 55. Default is 12.
|
Confirmed Ratio Label Color |
Select the color to be used to draw ratio labels for Confirmed patterns. Default is royal blue.
|
Pending Ratio Label Color |
Select the color to be used to draw ratio labels for Pending patterns. Default is navy.
|
Potential Ratio Label Color |
Select the color to be used to draw ratio labels for Potential patterns. Default is dark grey.
|
Font Size (4-55) |
Select the font size to use to draw all ratio labels. Input a value between 4 and 55. Default is 9.
|
Zone Line Bullish Color |
Select the color to be used to draw bullish zone lines for all patterns. Default is green.
|
Zone Line Bearish Color |
Select the color to be used to draw bearish zone lines for all patterns. Default is red.
|
Thickness (1-10) |
Select the line thickness to use to draw all zone lines. Default is 2.
|
Zone Text Color |
Select the color to use to draw all text associated with the zone lines. Default is dark grey.
|
Select the font size to use to draw all zone line text. Input a value between 4 and 55. Default is 12.
|
|
Show Reverse Zone Labels? |
Check this box if you want to frame the zone label text in the current zone line color. Default is checked (true).
|
Show Vertical Zone Line? |
Check this box if you want a vertical line drawn that will connect all zone lines. Default is unchecked (false).
|
Type I/II Tracking |
Check this box if you want to turn on the Type I/II signal tracking feature. Default is checked (true).
|
Tracking FontSize |
Select the font size to use to draw all Type I/II tracking signals. Input a value between 4 and 55. Default is 15.
|
Do Pending Alerts? |
This is the master toggle for the Audio, Popup, and Email alert options defined below relating to Pending patterns. Default is not checked (false).
|
Pending Sound? |
Check this box if you want to generate Audio alerts for Pending patterns. The Do Pending Alerts? option above must also be checked. Default is checked (true).
|
Pending Popup? |
Check this box if you want to generate popup alerts (i.e., alerts displayed in the Alerts Log) for Pending patterns. The Do Pending Alerts? option above must also be checked. Default is checked (true).
|
Pending Email? |
Check this box if you want to generate email alerts for Pending patterns. The Do Pending Alerts? option above must also be checked. If you do activate email alerts then you must also supply a valid email address in the Email To field defined below. Default is not checked (false).
|
Do Confirmed Alerts? |
This is the master toggle for the Audio, Popup, and Email alert options defined below relating to Confirmed patterns. Default is not checked (false).
|
Confirmed Sound? |
Check this box if you want to generate Audio alerts for Confirmed patterns. The Do Confirmed Alerts? option above must also be checked. Default is checked (true).
|
Confirmed Popup? |
Check this box if you want to generate popup alerts (i.e., alerts displayed in the Alerts Log) for Confirmed patterns. The Do Confirmed Alerts? option above must also be checked. Default is checked (true).
|
Confirmed Email? |
Check this box if you want to generate email alerts for Confirmed patterns. The Do Confirmed Alerts? option above must also be checked. If you do activate email alerts then you must also supply a valid email address in the Email To field defined below. Default is not checked (false).
|
Email To |
If you turn on email alerts for either Pending or Confirmed patterns (or both) then you must type in a valid email address to which the alerts will be sent.
Note: In order to use email alerts in general you must define your ISPs email settings under Options off of the Tools menu. Select the General category and then click on the Share Services option under Properties. In the Share Services dialog, click on the Email option under Available and then define the credentials for your ISP SMTP connection. Be sure to send a test email when done to confirm that your settings are correct.
For more information on setting up your email profile, please review this link:
https://ninjatrader.com/support/helpGuides/nt8/en-us/?general_section.htm
|
